Thursday, January 28, 2010

Carbon Fiber Crutches Will A Carbon Fiber Hood Trunk Break If You Attach A Spoiler To It?

Will a Carbon Fiber hood trunk break if you attach a spoiler to it? - carbon fiber crutches

I intend to himself a Evo, and I have a cap on carbon fiber trunk carbon fiber in it.

6 comments:

Neil said...

Not imossible but it must be very sensitive. I wouldnt risk.

Buck Futter said...

It is almost certain that they break and cracks ... The key to working with carbon fiber or other connection (of any material in this case) will remain within the limits of the hardware development.

I have no doubt that, (when a wing after-sales spare parts for baggage and were not designed to be used together or perhaps not at all) engineers, the carbon fiber.

Can be shaped, not make it fail? Absolutely ... improvise, but together in your garage without genius is unlikely to be successful.

1000 Man Embassy said...

Carbon fiber is stronger than steel, * * but which is most of the fiber body parts market, a fiber-plastic coated look, the plastic that you will not have to worry this much lower, according to Stahl. You do not have a hole at high speed and with a bit of good news, a very slight pressure, just kind of "touch" of the drill on the mark with a high speed, up through holes .. I want a hardware store and get metal plates made of aluminum, 3 "wide, so that the form of pre-drilling the rod inside and outside the car using the right size hole. The gain in the trunk. Go have, but please note that the revelations of the aerodynamic drag at high speed, 70 kph, you could have at least 100 pounds of force on the rear of the car and the trunk. C.

ase body / paint master tech. said...

depends on many factors. given huge spoiler, as on, and the speed at which the maximum speed is actually real carbon fiber is stronger than fiberglass, and most cars are fiberglass and the wings were much larger and faster, so you can safely do without cracks, but I They recommend to make sure that the gift is right, or it will break the bridge. Solid board mounting for supporting large, and when the fin is to offer the lowest air resistance, it will reduce the forces and do not really need to consume a car on the street power, but also less fuel if they do not act as a parachute

daggerda... said...

You'll Be Fine Be sure to use the rubber padding on both sides, a foot and a spoiler on the trunk hatch. The interior trunk you slip sure that attach the rubber pad, before the washer and screw.

mister ss said...

should be good.

Post a Comment